Quote Originally Posted by LoneWolf View Post
Using the same brass between bolt guns and semi autos never seems to breed the most accuracy. Bolt guns are most consistent when Neck sizing and maybe a light shoulder bump are the only adjustments made. I would separate about a 100pieces of brass just for the bolt gun and load specifically for it. Even if you use the same reamer autos are always hard on brass and will breed less consistency with shared ammo in the bolt gun.
Yes, the plan is to separate brass between bolt-only and semi-auto when the time comes. The purpose of this build will be hunting, but for now, my semi-auto 308 outshoots my Savage in 30-06 by a wide margin. It's time to remedy that. My 5-shot groups with hunting ammo out of my M25 was under two inches at 200 yards while my 3-shot groups for my Savage was around 3.5 inches at 200 yards.

Tony.