Results 1 to 14 of 14

Thread: Does someone have load recommendations for 77gr SMK and Varget.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Jan 2014
    Posts
    11
    Quote Originally Posted by 243LPR View Post
    I didn't see anything on Hodgdon that said specifically AR15 loads.They're using a 24" barrel so I doubt it.
    Yes you are correct. sierra indicated AR15 and told me they didnt work up a bolt action load. I incorrectly assumed Hodgen did as well but your right they used a winchester 24" rifle and we could take that as a bolt action. But with a coal of 2.260 it is much shorter than what I am trying to load. I have a starting CBTO of 2.968 which is about a 2.350 COAL

    I am trying to load (starting) .002 off the lands. AAs a rule of thumb when you increase COAL for a given load would the load of powder be decreased or increased

    Hodgen shows for the load to be between 21.0 - 23.7 (compressed) for the 77gr Sierra HPBT @ COAL of 2
    .260 so increasing COAL to 2.350 would increase cartridge empty volumn and should be a uncompressed load. As a rule of thumb do you increase or decrease a load when you increase COAL?
    Last edited by Bob Link; 10-11-2015 at 02:11 PM.

Similar Threads

  1. 30-30 load recommendations for Savage 340?
    By Kraynky in forum Ammunition & Reloading
    Replies: 6
    Last Post: 04-11-2016, 09:01 PM
  2. Sanity check plz, 11vt 308 varget tight chamber load!
    By OscarMike in forum Ammunition & Reloading
    Replies: 10
    Last Post: 03-14-2016, 12:02 PM
  3. Striker 308 Load Recommendations
    By 243LPR in forum Ammunition & Reloading
    Replies: 11
    Last Post: 10-06-2014, 12:35 PM
  4. New 116 FCSS Factory Load Recommendations
    By granman in forum 110-Series Rifles
    Replies: 0
    Last Post: 10-24-2012, 08:12 PM
  5. Replies: 3
    Last Post: 09-07-2011, 09:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •