Cabela's Savage 12FV THREAD FEST

[foxx]

I don't understand what you are trying to do here and how you are checking for clearance. The channel simply needs to be opened up a bit and then try setting the barreled action into the stock, holding the action down into the stock and check for clearance. It appears to me as though you have the action tipped down in the front, causing the barrel to be pointed too far down.

[Johanson]

????? Is the barrel mounted to the action?

Yes!

I don't understand what you are trying to do here and how you are checking for clearance. The channel simply needs to be opened up a bit and then try setting the barreled action into the stock, holding the action down into the stock and check for clearance. It appears to me as though you have the action tipped down in the front, causing the barrel to be pointed too far down.

I'll post another pic of the action/barrel bolted into the stock.

[Johanson]

[foxx]

Other than the fact it's not opened up with an even, circular contour, I don't see a problem. Is the action level in the stock? Is the barrel free floated now? If yes to both, it should be fine.