savage 111 trophy hunter @ boyds

[SThomas3791]

im going from my factory composite stock to a boyds prairie hunter stock. all for a savage 111 trophy hunter bottom bolt release detachable mag long action 30-06. i was told by savage i need "frame, long, syn, matte (dbm) part# 109399" $14 and "mag bottom long matte (dbm) part# 106104 $24. my question, is there any hardware needed to assemble these pieces into the new stock or will the existing hardware do the job? if not does boyds send the hardware that will work with the new stock? im already planning to get the limbsaver recoil pad with it also.

[foxx]

Some of the earlier Savage factory stocks had a removable frame, but now that frame is molded into the stock... that is why you need 2 parts now when putting those into the Boyds stock. the frame and the magazine. there also might be a small metal pillar-like piece but it is not absolutely necessary.

[Inebriated]

Some of the earlier Savage factory stocks had a removable frame, but now that frame is molded into the stock... that is why you need 2 parts now when putting those into the Boyds stock. the frame and the magazine. there also might be a small metal pillar-like piece but it is not absolutely necessary.

Ah, so things have changed. Sorry for any confusion, SThomas.


This is from my (and I admit, I had to check the date, I thought it was more recent) 2012 111 .30-06. All parts necessary to retain the magazine are in the frame.
https://farm1.staticflickr.com/592/2...0a89d9b5_k.jpg
https://farm1.staticflickr.com/619/2...0c1bef99_k.jpg