Results 1 to 13 of 13

Thread: Model 12 lrp (Barrel not centered in stock)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member memilanuk's Avatar
    Join Date
    Dec 2006
    Posts
    587
    Does it have the aluminum bedding block? If so, check carefully for any paint over-spray on the side that the barrel is contacting the channel. A small imperfection at the back end can kick things over a considerable amount 12-18+ inches away at the other end.

  2. #2
    Basic Member
    Join Date
    Mar 2015
    Location
    North West Alberta
    Age
    52
    Posts
    32
    Quote Originally Posted by memilanuk View Post
    Does it have the aluminum bedding block? If so, check carefully for any paint over-spray on the side that the barrel is contacting the channel. A small imperfection at the back end can kick things over a considerable amount 12-18+ inches away at the other end.
    I'm gonna take it back apart & check on this. I'm sure it's gonna be another tack driver..but it's driving me crazy , just looking at it.

    Thank-you

Similar Threads

  1. Help, barrel wont stay centered in stock.
    By doodedge in forum Axis Series Rifles
    Replies: 6
    Last Post: 07-05-2015, 02:33 PM
  2. New LRP-Barrel not centered in stock
    By savman in forum 110-Series Rifles
    Replies: 4
    Last Post: 04-20-2013, 03:08 PM
  3. Action not optically centered?
    By r0ttie1 in forum Optics
    Replies: 62
    Last Post: 05-13-2010, 11:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •