does anybody make a recoil lug for a savage accustock with the receiver detent on it that will fit a accustock without having to grind on it??
does anybody make a recoil lug for a savage accustock with the receiver detent on it that will fit a accustock without having to grind on it??
Are you looking for a thick one or factory piece?
Factory
http://www.midwayusa.com/product/177...ccu-rail-steel
The Dunning-Kruger effect is alive and well.
Looking for one like that with a detent on it so it fits into the receiver action and does not slip when tightening the barrel nut. I have seen some recoil lugs that have a square detent and have seen them with a pin type.
Just install a second pin 180 above the original so the lug can't move up-down or side -side. I made this to locate the hole for the second pin in ring after drilling the lug.
Both pins have a slight interference fit in the action so it stays attached and in position when a barrel is removed/installed.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Tom if you happen to find one pm me or post up where you got it....i have a 110BA ive been looking for a pinned or detent lug for for a long time.
I am wondering if Savage has a patent on it so nobody can make one. Would sure make changing barrels on accustocks easier.
im not sure but yes it would make things easier.
Bookmarks