Reply With QuoteMy Axis did not come with a scope base. I bought a one piece Warne and I'm happy with it. But there are lots of fine choices like EGW and Weaver, etc.
If not what mounts would you recommend?
Thanks
My Axis did not come with a scope base. I bought a one piece Warne and I'm happy with it. But there are lots of fine choices like EGW and Weaver, etc.
Deleted.
Last edited by rcmark; 08-11-2015 at 09:03 PM.
My Axis came with scope mounts, rings, and scope... but I'm gonna switch to the EGW mount and a better scope.
You know what I like best about people? Their dogs.
Rcmark, why no love for the Axis? Mine feeds extremely well, extracts and ejects extremely well, and most importantly shoots extremely well.
Personally, I would not recommend anyone use the bases included on any factory rifle. Typically, they are extremely cheap and will eventually fail due to not being able to handle recoil well. The slots eventually get damaged and deformed, loosening the bond between the rings and bases. So even if yours comes with bases, I'd replace them.
Generally speaking, rifles that come from the factory without a scope do not come with bases, either.
Will this mount work?
http://www.ebay.com/itm/Weaver-48329...item20fed9fec0
No idea. There are several types.
For 10/110 series there are:
Short action round back
Short action flat back
Long action round back
Long action flat back
Then there are Axis, which are all the same.
For hunting, i like dnz gamereaper. It is a one piece mount with integrated rings. They are almost " idiot proof" because the rings are machined to be aligned properly at the factory. Just screw them on, add your scope and top them off with the top half of the two rings. Usex to find them for $45. Now rhey are typically $60. Still a,good value.
Weaver 48347 is their Axis mount. I personally like the EGW rail better, but the Weaver rail is fine as well.
I chose the weaver rail for my axis , fit and works just fine and at less than one half the cost of others that are available .
According to Weaver this will work.
Anyone actually used one?
48347 MULTI SLOT SAVAGE AXIS 506 $16.95
http://www.weaveroptics.com/rings_ba...lti-slot_base/
http://www.opticsplanet.com/weaver-m...se-system.html
really? you seem bitter. too bad. but you do seem to have lots to say about these crappy junky worthless axis rifles.Originally Posted by rcmark
anyhoo, i used a single weaver base on my axis hb .308win build, works just fine ...
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks