Results 1 to 25 of 35

Thread: MkII FVSR ammo test (lots of ammo involved)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Mar 2015
    Posts
    184
    Quote Originally Posted by Bang View Post
    Here is a great treatise on small bore group analysis:

    http://rifleman.org.uk/Fuller_group_diagnosis.htm
    sweet article thanks.

  2. #2
    Bang
    Guest
    Well, I've sent over 500 rounds through this pipe across 50 yards divided by 18 power and have been gnashing my teeth at the size and randomness of the groups. A one-inch spread is normal, so is three or four very close together with the rogue that screws it up.

    Yesterday at 94 degrees and no wind I shot at my usual home-made target consisting of twelve 3/4" blue sticky dots on 8-1/2 by 11 white copy paper. I tried several different ways of holding the rifle and of touching only the trigger and trigger guard (with my thumb). Front end on a padded scissors jack, heel on a V bag. I finally got a group of five in .359". A random success, indeed, but the rifle did it, so it has given me a huge lift of spirit and appreciation for the rifle.

    Now here's the kicker....I was shooting the 525 brick of Federal Golden Bullets, 36 grain brass-plated hollow point generally viewed as junk! Also, the spring I had in the trigger yields a let-off of about 12 ounces. It is so light, the bolt sometimes does not cock...the sear slips to the safe notch on closing. Happens maybe once in 30 rotations. Apachee set-up is future plan.

    And the beat goes on....

  3. #3
    Basic Member
    Join Date
    Aug 2011
    Posts
    331
    If you haven't changed the bottom metal I'd recommend that too along with the Apachee trigger kit. I seem to shoot better groups using squares for targets, I aim at the corner.

  4. #4
    Bang
    Guest
    I made my own plate of 1/8" thick aluminum. The extra-special steel plate on the Boyd's stock was bending with only 15 in-lbs torque. I agree about the squares and bracketing one corner. I think I'll try that again. Thanks!

  5. #5
    Bang
    Guest
    Bought a box of 50 Gemtech .22LR subsonic at the Oaks gun show to try out in the Savage Mark II.


    Impressive. Looked up Gemtech and found they are manufacturers of suppressors and have a line of subsonics as well.


    Turns out these Gemtech .22LR are made by CCI. Interesting, as CCI standard velocity LR is the one of the cartridges my Mk II shoots best. The Gemtech bullet is 42 grains.


    And the beat goes on….

Similar Threads

  1. B-Mag Series: 17 WSM Ammo Lots that are better/worse than others?
    By grizzly_a in forum Savage & Stevens Rimfire Rifles
    Replies: 2
    Last Post: 04-15-2019, 06:53 PM
  2. Model 11 Hog Hunter .308 Win, Ammo Test
    By SUB MOA in forum Ammunition & Reloading
    Replies: 27
    Last Post: 06-07-2015, 09:03 AM
  3. Semi-Scientific 22LR Ammo Test
    By Mozella in forum Ammunition & Reloading
    Replies: 4
    Last Post: 04-04-2015, 04:08 PM
  4. Mark I/II/93R: Did some ammo test with my Mark II FV
    By nonnieselman in forum Savage & Stevens Rimfire Rifles
    Replies: 3
    Last Post: 12-17-2010, 01:16 PM
  5. CB ammo in MKII?
    By handirifle in forum Ammunition & Reloading
    Replies: 6
    Last Post: 10-09-2009, 11:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •