I was in the same boat as you, with multiple steps required for the 6x55. I was using the RCBS Lube Die to decap, and the Redding 6BR neck size die to size. I never had to bump shoulders, but if I did, I had a 6BR FL sizing die for that. If I needed to body size, I'd have been screwed because the reduced taper of the 6x55 makes the gutted 6.5x55 dies useless contrary to what was suggested before I started the build. I finally sent 3 fired cases to Redding, I'm just waiting for the die set to be made now. Decap and size in 1 step.........priceless!
Bookmarks