Well, I just scrolled down and found one Black Hole Weaponry a sponsor here! Any other ideas would still help though.
Searching for an Armalite AR-10 barrel source. I found one called Accurate Shooter, or something like that, however they want $700 for a barrel. There are plenty of DPMS styles out there but no luck on the Armalite. This would be for a 26" 243 bull barrel.
Well, I just scrolled down and found one Black Hole Weaponry a sponsor here! Any other ideas would still help though.
I thought DPMS and Armalite patterns used the same barrel extension and only the barrel nuts were different.
This page seems to indicate the barrels (specifically the extensions) are cross compatible so long as a corresponding pattern bolt and carrier are used. It has been a while since I built my DPMS-pattern .308 AR, so I'm a little rustier than I thought.
Apache gunworks will make them in either pattern.
Willing to give back for what the sport has done for me!
I am 99% on if you use a DPMS barrel on an Armalite you will need a dpms pattern gas block and gas tube. The reason being the armalite gas port is in a different location and the gas tube is longer. This makes the use of the DPMS block and tube critical.
Bookmarks