Results 1 to 14 of 14

Thread: Issues dialing in scope on Axis II

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-17-2015, 03:10 PM #4
    tammons
    Status
    Offline
    Team Savage
    Join Date
    Feb 2007
    Location
    Georgia
    Posts
    1,525
    Quote Originally Posted by Exospeed View Post
    I measured with calipers between the top of the rifle and the bottom of the scope and the scope tube is 4mm lower (closer to the rifle) in front than in the rear. The rings are the same size so I'm wondering if that is normal or not.
    Not Normal. You have a bad or mismatched set of bases.
    Last edited by tammons; 04-17-2015 at 03:37 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Axis XP - Included Scope reticle issues and scope base threads crossed
    By NyVetteGuy in forum Axis Series Rifles
    Replies: 6
    Last Post: 09-09-2018, 10:29 PM
  2. Scope issues
    By Smokestick in forum 110-Series Rifles
    Replies: 22
    Last Post: 01-08-2017, 01:37 PM
  3. Mark I/II/93R: Dialing in my 93R17 BVTSS
    By rchouser in forum Savage & Stevens Rimfire Rifles
    Replies: 0
    Last Post: 10-05-2015, 12:23 PM
  4. Scope issues.
    By Noobshooter84 in forum Axis Series Rifles
    Replies: 10
    Last Post: 03-25-2015, 01:15 PM
  5. Axis Issues, need some help!
    By 1ShotKing in forum Axis Series Rifles
    Replies: 19
    Last Post: 10-14-2012, 06:37 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules