Are Seekins Scope Rings Really Worth the $$$?

[BigDave]

I guess I will find out. I am returning my Weaver Picatinny Six Hole 30mm Low Rings. I not only bought Seekins rings, but I had Primary Arms overnight them (another $25) to me. I am sick and tired of waiting. Yes, yes. I am the poster child this month for Buy Twice, Cry Twice. You think I would know better.

Being precision obsessed (like me) and being on a budget are mutually exclusive. Oh, well.

Why did I return my Weaver Rings? My very personal lack of confidence. I am not mounting my $1K scope with 40 dollar rings and constantly wondering about their quality when I shoot. I do not need that distraction. That is important to me.

My Weaver Scope Company rings are made specifically for a MIL STD Picatinny rail. I went on their website to make sure of that. Note: ALL of their Their rings labeled "Tactical-Style" are made for old fashioned, discontinued Weaver Rail System from the year 1930.

We will be discussing only MIL STD Picatinny rails and scope rings here.

My Savage OEM 0 MOA EGW rail is Mil Spec perfect at .206" lug width. That is awesome.
The Weaver Picatinny rings cross bolt is grossly undersized at .188". Heck, it's close to fitting an out of spec Weaver Rail System that has .180" between the lugs.

What do all these fine measurements mean in the real world? SLOP! A lot of it. You can feel a "ton" of slop and a very loose fit on the Weaver Picatinny rings to my Mil Spec Picatinny rail. I would have to force the rings FORWARD against the lug while tightening. Even TPS (great rings...sort of) cuts their cross bolts thin so there is slop on a Mil Spec rail.

I called Seekins. In two minutes the rep checked with a Tech and had my answer. Seekins cross bolts are machined to have a .008" interference fit on a Mil Spec/STD Picatinny rail. Weaver was several hundreds interference fit. Way too much slop for me.

OCD much? I guess so. Maybe the same for me and all the others that buy Seekins and Badger rings. I think we are in a minority.

Would my Weaver rings have worked out OK? Oh, most likely. But I cant abide by such lack of precision. PLUS, Weaver used an inferior weak steel for their cross bolts. You can NOT torque them to the typical 65 inch lbs. They are 35 inch lbs max.

I made a personal judgement call. Will my scope mounted in Seekins rings be "better" than the same scope mounted in Weaver rings? IDK. Will I every WORRY about my Seekins rings. The answer is no.

Oh, I am sure their are rings costing less that do as well as Seekins. I simply ran out of time and patience trying to save a dime. I made an executive decision late today and ordered the Seekins Low alloy four hole rings to be here Wed. My scope will arrive Tuesday. A day before the rings.

What is the deal with Seekins 6 hole rear ring and 4 hole front ring? They were more money and harder to find. Discontinued some websites said. They looked kind of funky in truth. I just bought the four hole ring set.
About the Seekins Four Hole Alloy Rings:
"This integral, flat recoil lug is far superior to cross bolt lug designs and fits precisely into Picatinny slots with minimal clearance. For maximum torque and strength, Grade 8 T-25 Torx® fasteners are used that will not strip out while being tightened to the appropriate specification."
or here:
http://www.seekinsprecision.com/scop...30mm-tube.html

"

[Idaho-45]

BigDave, Be assured that you will get quality with the Seekins Rings you purchased!!! I have several sets of them, & I'm very impressed with them!!! One thing I really like is the way they clamp onto your rail. Instead of the "giant" nut holding the cross bolt in, you'll notice a nicely machined 'flanges', with 2 large torx head screws holding things together. I can't say anything about the "6" screw topcaps, but, I'm sure there are folks out there that feel the need for such. My experience is that I feel something else will probably fail before those rings do! My understanding is that Vortex has a style of their precision rings that are the same, & also made by Seekins. Enjoy them! Idaho-45

[BigDave]

BigDave, Be assured that you will get quality with the Seekins Rings you purchased!!! I have several sets of them, & I'm very impressed with them!!! One thing I really like is the way they clamp onto your rail. Instead of the "giant" nut holding the cross bolt in, you'll notice a nicely machined 'flanges', with 2 large torx head screws holding things together. I can't say anything about the "6" screw topcaps, but, I'm sure there are folks out there that feel the need for such. My experience is that I feel something else will probably fail before those rings do! My understanding is that Vortex has a style of their precision rings that are the same, & also made by Seekins. Enjoy them! Idaho-45

Yes, those two grade 8 torque screws instead of the big fabric snagging nut helped sell me. Torque on those clamping screws are a healthy 55 inch lbs. Seekins cap screws are 15-20 inch lbs..all according to Seekins. They advertise the rings as being "slim line" and being able to fit snag free in scabbards better. I really like not having that honking big nut on the side! Thanks for the feed back.

I am feeling pretty good about this in spite of having to cry twice! Those 119 dollar rings are costing me a considerable amount more had I just ordered them in the first place. I want to prevent others who appreciate precision NOT to make the same mistake that I did.
In the end, even the very nice TPS rings did not fit my needs/desires.

Seekins man. Somebody told me this on this forum and I unwisely ignored them. I KNEW better...of course...LOL. Not! I am just glad I finally "saw the light".

[missed]

I am running the high end Vortex rings which are made by Seekins. I love them. Well made products.

[BigDave]

I am running the high end Vortex rings which are made by Seekins. I love them. Well made products.

Ah, you are Right! Those are Seekins rings! I missed that.

I watched a dozen videos on scope mounting. I liked the guy from Vortex the best by far. He used much sounder rules of physics and mechanics than so many other "experts". Nobody does it like he does. Nobody. He is worth a watch. But I also prefer to use loctite and at least check my rings with a lapping bar/tool. He doesnt do that. But his actual mounting procedure is correct as per Mr Seekins!

. Now I can see exactly how much "slop" they have on a Picitinny rail. The Vortex tech wiggles them. Looks like not a lot of play. Pretty much what I expect to see with a .008" difference between the cross bolt and the lug groove. The slop with the Weaver rings was unacceptable to me.

Thanks for posting.

Note that the Vortex "Low" rings (.87") are the same height as Seekins Medium rings (.87") and so on. Vortex does not offer the rings I bought... Seekins Low .82"

Oddly, Vortex has a much different torque value for the two clamping screws. 45-50 in/lbs vs Seekins call for 55 inch lbs. 45 inch lbs is about 20% less. That makes me think that Vortex has spec'd something other than Grade 8 machine screws. Weird. Vortex does list the screws as being Grade 8. So????

https://www.youtube.com/watch?v=qiRwWlXf0Do

[BigDave]

I got the rings today and mounted them. They are beyond fantastic. There are so many major and minor details that make these rings the best choice IMO. Simply amazing. I would actually pay more for them if I had to.

They are actually priced well below Badgers and others that offer me features I do not want. I like not having that big nut on the side. Huge plus for me personally.

[darkker]

As to your original question:
"Are Seekins scope rings really worth the money?" That question = "Is this girl the right one for me?" No one but you can answer that question. "Worth it, or Best" are specific to an individual only.

Being obsessed with accuracy and on a budget are most definitely NOT mutually exclusive, I've more than proven that for many decades. Fixing problems that don't yet exist, and being on a budget are mutually exclusive however.

My $40 Primary Arms rings hold the cheap stuff, AND they hold my $1k scope. The truth is, of my two rifles that I shoot to a mile with; the one that gets used the most has the PA scope on it, not the expensive glass.

I'm glad you spent enough money on what you wanted to make yourself happy though.

Cheers

[yobuck]

Take a look at the old Weaver 2 pc aluminum bases that have been in use for decades.
And the old Weaver rings also. I guess we had problems we never realized we had.
The deer apperently didnt realize it either. Also look at the Unertle scope mounting system.
It would be hard to think up something more flimsy that that.
I used that system for about 30 years on a 30x378 and so did lots of others.
I also have been using the 6 screw Weaver rings on several of my large rifles including
a 30x378 with a non Weaver base. If ive got problems, again i dont realize it.
I also have on 1 gun, a Nightforce scope with Nightforce rings and base. Which i cant shoot any better
than my other guns having leupolds and cheaper ring/base setups.
Are the Nightforce rings/base better? Id say no doubt they are, but is all that necessary?
I guess you can never go wrong owning the best of everything.

[BigDave]

As to your original question:


I'm glad you spent enough money on what you wanted to make yourself happy though.

Cheers

I always try to spend the least amount of money to make me happy/satisfied. I am very happy with my $800 Savage. A $4,500 AICS or GA Precision rifle would not make me proportionally happier.

Would my Weaver rings have done the job? IDK. They did NOT install any degree of confidence. I would always wonder about them. I try to buy things that someone obviously took some pride in designing and making. That is MY nature. Is is practical. IDK. Maybe yes,maybe no.
That is why it is a hobby. I get to choose the things that make me pleased with in reason. A rifle costing almost 4k is not with in my line of reasoning. Precision made rings by someone that I know fairly well by reputation (Mr Seekins) that I could well afford is my choice and the choice of many others. So are cheaper Weaver rings for so many buyers.

Sorry to apologize. I had issues with MY (not yours, mind you. I can not comment you YOUR rings) out spec sloppy fit of the Weaver rings. The cross bolt on both sets I bought (medium and Low) were quite undersized for a Picatinny Rail resulting in excessive slop. Had that not been the case I would have kept them.

I am happy that something far less expensive than what I bought makes all you happy. Honestly, I was expecting that to be the case for me. It was not even close. Lucky I can do a very easy return via Amazon.

I admit..in the end, I did pretty well buying things on a budget for this project. I am talking about a wide variety of purchases from .30 caliber Dewey rods, Parker Hale Jags, rifle case (NC Star of all companies..simply awesome made in China case...very well made!) and shooting mat, bipod, stock pack and more (from Triad Tactical).

I had over 95% instant satisfaction with my first choices. I ended up returning and upgrading only two items, my optics and my rings.

1)Falcon Menace (tracking issues) returned and upgraded to a Bushnell (awesome scope!)
2)Weaver rings (sloppy fit my EGW rail, low quality low torque steel cross bolt) returned and upgraded to Seekins rings( value far beyond what I paid). IMO, of course. I would never in a million years be able to even comment about these rings unless I had actually held them in my hand and mounted them. Just sayin.

[Russmerle]

Are you going to post a pic of all your goodies? I like seeing other members builds...

[BigDave]

Are you going to post a pic of all your goodies? I like seeing other members builds...

Are you kidding? Heck, yes! This took months of planning and weeks and weeks of purchases trickling in via UPS/USPS etc. I still need to:

1) Whack a bit off the front of my EGW rail so I can slide my scope back to give me a better (perfect) eye relief. The bell is touching the unused forward overhang of the rail. Cutting the overhang off will allow me perfect scope positioning for eye relief.
I got some Birchwood Casey black paint/cold bluing stuff today. (also rented and shot a suppressed full auto .45ACP Mac-10 at the same gun store.range...ho, ho very cool). I will finish the rail and scope mounting tomorrow. Holland scope anti cant needs to be installed too.
http://www.midwayusa.com/product/122...t-device-matte

2) Wait until my Atlas Bipod comes in a few days. I have the rail already mounted. All I need to do is use the QD and click it in place.

3) My MDT FDE poly mag will be here Monday or Tuesday. That will help showcase the spare mag holder on my Modular Stock Pack by Triad. The Stock Pack is basically fitted. I just need to hot knife the excess straps is all.
http://www.triadtactical.com/Triad-L...k-TT-4400.html
check out the 11 photos in this link. I got a moveable ammo strip and a moveable spare mag holder for this system.


4) I hope to be shooting photos of the gun at the range for initial Zero by Wed/Thusday...Today is Sunday.

5) My 200 rounds of FEDERAL GMM 168gr should be here Monday.

It will all come together next week. The scope will be totally mounted and the rail trimmed and painted by late Sunday. Everything after that is just waiting for parts and ammo.


Finding time for the Savage build is hard. I went to a gun show today and got 500rnds Fiochi 124 gr 9mm to get ready for my first 3 gun competition. I got my custom self built AR and the tricked out Glock 100% ready. Gonna borrow a shotgun for now.

I am OK. Not great. Some days good. Usually never worse than OK. I often do better than the young guys and I am 58 with a frigging carbon fiber right leg below the knee!

[BigDave]

Double posted. Sorry

[Russmerle]

I am OK. Not great. Some days good. Usually never worse than OK. I often do better than the young guys and I am 58 with a frigging carbon fiber right leg below the knee!

You may have an advantage with the weight reduction in that right leg! Good on you for getting out there and setting a good example in doing what you want regardless of life's setbacks... It's an awesome thing keep it up sir.

[BigDave]

You may have an advantage with the weight reduction in that right leg! Good on you for getting out there and setting a good example in doing what you want regardless of life's setbacks... It's an awesome thing keep it up sir.