I wanted to show you fellers a 7 mag I built with Burris' new Veracity on top, but obviously I'm dumber than a caveman because "The Ultimate Guide to Posting..." does not at all jive with what I find in Photo Bucket. If you're interested, and have some easy to follow advice, I'd love to post a couple.
Thanks.
Thanks to Rick W for posting my pics (below). I will conquer Photo Bucket! Maybe not today, but...
I really think that paint job accents the stainless and black hardware on the rifle very well. Specifically, the rig is a 112 7mm Rem Mag, varmint contour barrel, Timney trigger, Boyd's Pro Varmint stock (pillar and glass bedded). The scope is a Burris Veracity 4-20x50 E1 FFP in Millett rings on a EGW 20 moa rail. I purchased a 12"x12" sheet of 1/8" thick Kydex to make the cheek rest (very simple).
I wanted a bit of grip texture on the stock, so I painted it with Valspar Stone and then added two coats of Minwax Helmsman exterior polyurethane. The feel of the stock is fantastic.
The stock barrel, which is 1:12 is not quite fast enough for my preference, but with it shooting as well as it does (1/2 moa consistently) I think I'll probably wait til it's shot out before I order an OEM. The rifle shoots two loads equally well: 1) Hornady 154 gr SST and 63 gr IMR4831; 2) Berger 168 gr VLD (hunting) with 64 gr IMR4831. At 800 yds the Bergers group very well.
Reply With Quote
Bookmarks