Long story some what shortened, I ruined my ejector and spring with a little more than warm load. It was a SSS ejector and spring. I tried them for 2 months with no luck. So I ordered a new ejector, retaining pin and a 110ba ejector spring (no my rifle is not a ba). I got the parts yesterday and got them installed. So here's my problem. The slot for the retaining pin sticks above the bolt face. So it catches on the face when to try and chamber a round. I'll attach a picture so you can see what I'm talking about. I did email savage this morning and they promptly responded and are shipping me a new one to try.

Has anyone else ran into this problem? It is a ptg bolt head. The SSS kit I had installed worked great with no trouble. So I'm sure its not the bolt head.