Quote Originally Posted by LongRange View Post
i put the cases with the tempi off to the side then after sizing i use a brass bore brush on my lyman express and run the brush in the necks...it gets most of it off..i then use those cases as sighters the first time out...i learned the hard way the first time i used it on all the cases and ended up with a lot of fliers thats why i only do a few with the tempi now.
Try putting it on the outside and it cleans off easily after dipping in alcohol.
As for speed of the Anneal rite. Last week a good friend stopped by with 180
378 wby cases. While i was setting up the unit he was applying a small dab of
Tempilaq on the outside neck of each case. He had a 50 case loading block done by the time
i had it set up. I then did 3 cases to show him how it was done before he took over.
I finished the dabbing with the Tempilaq on the others while he annealed them.
We were finished all 180 cases in less than 1 hour. If you were alone without distractions,
you could easily get a rythem and not need the tempilaq.