School me on Annealing Brass....

[BillPa]

if your cheap like me you can make your own annealing set up for a few bucks...this is mine i made out of some scrapes i had lying around....

Move the tip of the flame down to the top of the shoulder so they're annealed too.

Bill

[LongRange]

Move the tip of the flame down to the top of the shoulder so they're annealed too.

Bill

thanks Bill....i do this pic was taken just to show the set up...my annealed brass looks like new lapua...about a 1/4 of the way down the case.