After reading about the success others had with the SAV-1 Rifle Basix trigger, I installed one in my Axis 243 (not accutrigger) and another (today) my 111 7mm Rem Mag. With the 243 I kept the pull force at 3 lb and am very happy with the feel and the performance. In the case of the 7mm, which I set at 2 lb, I noticed the bolt felt a little tight. I backed off the action screws, in case they were protruding. That had no effect on smoothness of action. However, I could then make the gun slam fire (empty casing). I tightened the screws back up, no more slam fires. Could the slam fires be due to introducing unnecessary movement in the mechanism when I loosened up the screws and compromised the bedding?

In retrospect, I'm wondering if the tight feel is due to tension on the SAV-1 safety adjustment screw.

Thanks in advance for any advice/suggestions.