Hi all,

I've got a 10/110 FCP chambered in 338LM and decided to replace the OEM spring with a Wolff Spring (32lb Long Action).

Admittedly I very foolishly did not take measurements prior to dissassembly and am at a loss about appropriate distances. Tried looking at thread below, but maybe I missed this information: does anyone have the correct distances from the tip of the firing pin to the firing pin stop nut and the correct length of the firing pin spring? I did somehow manage to put everything back together but can't shake the feeling it's incorrectly reassembled...

http://www.savageshooters.com/showth...tion-requested

Thank you all for your time and replies.