Quote Originally Posted by DrThunder88 View Post
I don't know. Farting around is half the fun. The epoxy/fiberglass layup I did on the forend of mine helped quite a bit. I don't know if pre-stressing it from the inside with allthread and some nuts was to any positive effect, but it did add a bit of mass. I suspect that if I was better with fiberglass, it would have been even better. I had designs on wrapping the wrist in a few layers but couldn't work out the geometry.

I did eventually upgrade to a Boyds stock, but only because I was putting on a varmint barrel. Actually the Boyds stock also needed some farting around with owing to that goofy finger groove and the cheekpiece.
I have an Axis with a heavy barrel, does Boyd make stock for it or do you have to cut out the barrel channel to make it work?