You will need the mag box and follower and spring. A bolt head too and make sure you get a long action bolt head with the correct firing pin hole.They now make 2 sizes. Just measure the pin diameter.
I have a 110 action stagger feed that has the mag box attached to the action. It is currently set up for a 30-06 size case. What do I need to do to set it up for a magnum like a 7mm rem mag ?
You will need the mag box and follower and spring. A bolt head too and make sure you get a long action bolt head with the correct firing pin hole.They now make 2 sizes. Just measure the pin diameter.
Willing to give back for what the sport has done for me!
I converted a 30-06 to a 264WM. Left the original follower in it and it worked flawlessly.
I'm a firm believer in the theory that if it bleeds, I can kill it.
according to this FAQ article, they are interchangeable with 30-06 mags. What you have should work fine.
http://www.savageshooters.com/conten...Feed-Magazines
Where can I get the parts I need?
Use what you have. It works fine for both.
Bookmarks