Usually with a new rifle you pull it apart and check everything is ok. This is not just specific to the Model 11 but most firearms.
The stock screws may need to be tensioned correctly. There is an article on here on how to do that.
Accuracy usually improves once that is done.
Last edited by Code4; 11-26-2014 at 05:15 PM.
Roger that. I tore it apart after I had posted this. I cleaned it up, then sanded the stock (which is slightly out of form) so that it wouldnt rub the barrel anymore, and truly be free floated. I hope to drive tacks next time if I can do my part. Thanks for the input.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks