I finally got around to mounting my boyds stock. I will say it was a perfect fit. Went together perfectly I am going to do the dowel rod and sand paper trick to open the barrel channel up just a bit. It passed the business card test for free floating but just barely it was a bit snug toward the base of the barrel. I will be bedding the action so it will be a good time to do that as well. I got some pics snapped of it mounted, but didn't have time to upload them before work. The barrel and action seem to be cut perfectly even in the channel. The stock is flat out gorgeous. I can't wait to take it to the range after I get the bedding job done. Now I just have to find the time to do that.