It's a factory model 11 accu stock with the wedge to lock down the recoil lug. It's a factory rifle except for bolt handle. Trigger will not reset. sear will not reset when operating the bolt. what I have to do to reset the trigger/sear is with the bolt closed on the chamber. Raise the bolt handle up but not back. pull the safety back to the safe position. Then bring the bolt back. I can now push it forward to chamber another round. The trigger/sear will now operate normally. If I don't set the safety before cycling the bolt the trigger/sear will not reset to firing position.
Mr M, I will check the spring. Thanks