Used two bolts per leg cuff, it adjusts with an open end, tilt the side that needs leveling with one hand, cuff drops to the ground/tighten with other hand so one person can move, set-up and adjust. Did not need a shim welded to tube by using two opposed bolt tightners.
The leg cuff on the right is about 3" long adjustment for the uneven ground, the rear may need to get longer to adjust for the drop. Cuffs will allow for 6-8" adjustment.
This is a 350 yrd lane, may be able to see the dark green patch of weeds on a 25' tall log/dirt berm to left of orange leafed tree down past the weed field.
Reply With Quote
Bookmarks