Results 1 to 17 of 17

Thread: New 223 is cratering primers

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Feb 2007
    Posts
    326
    Nope. 55 gr FMJ Remington UMC. 45 gr Winchester HP. I was also shooting some reloads with CCI 400 primers. I switched to 45 mag and it is still cratering, but it is not piercing anymore.

  2. #2
    Basic Member OldLobo's Avatar
    Join Date
    May 2014
    Location
    Lincoln, Nebraska
    Posts
    23
    I was doing a little reading earlier as I'm new to reloading (kinda relevant here), on reloads the recommended primer I have seen in some cases is a Magnum version due to the high pressure of the 223. The cup is thicker. I have the Axis 223 also, and have cratered rounds I can safely say are well under max with no throat issues raising pressures. The primers which cratered were Winchester SR. I have "acquired" a few replacements in the form of CCI 450 Magnum small rifle primers (is this what you were referring to above?) hoping to alleviate the problem, we'll see... Good Luck!

Similar Threads

  1. Primer Cratering
    By deertroy1 in forum 110-Series Rifles
    Replies: 47
    Last Post: 01-30-2020, 08:07 PM
  2. Cratering/Piercing primers
    By BoilerUP in forum 110-Series Rifles
    Replies: 11
    Last Post: 05-04-2013, 09:21 PM
  3. Primer Cratering
    By henry1 in forum 110-Series Rifles
    Replies: 23
    Last Post: 02-22-2012, 06:22 PM
  4. Cratering and slightly flattened primers with factory ammo
    By toaster in forum Ammunition & Reloading
    Replies: 11
    Last Post: 11-27-2009, 01:42 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •