Hmmm. This is a conundrum.
I hope I didn't offend you, I only put that out there as a general warning. I would hate for one of the many noobs out there to think that all bolts are equal and pull the old switcheroo without knowing. Since these posts can stay up for years, it just seems like a good idea to continually throw out the warnings.
So just to clarify the bolt works fine until you put either the go-gauge or a spent brass into the chamber?
If the go-gauge doesn't fit, and you set the barrel to the go-gauge, then something has moved or is obstructing the distance between the bolt face and the datum point inside the chamber assuming the bolt cycles fine with nothing in the chamber that is.
Reply With Quote
Bookmarks