I use one similar to this on my 110 round back w/ Accutrigger. I know they make on for the flat back, they specifically asked me about it when I ordered mine. Allows for a TON of scope adjustment too! Long tubes and short tubes fit fine. I opted for the extended base for even more adjustment. I believe they do have MOA measurement options as well, if you need that.
http://www.weaveroptics.com/rings_ba...lti-slot_base/
Originally Posted by mazda3gun
Will that base for on a 110 flat back short action??
Looking for a base that will fit a Nikon prostaff 3x9x40 on a pre accutrigger flat back .243 LH. The tube on my 3x9x40 is too short. I see them for long action but will they fit short action. Not that educated yet so sorry for the repeated questions.
I ended up going with an EGW rail.
You're using the exact same scope(most likely) as I have on my 110. It's a round back, 0 MOA, long action, ext. length scope base. With Burris Zee High rings, it clears the obj bell just fine.
If the Weaver site is too hard to navigate, give them a call. They helped me get the exact piece I needed.
I chose the Weaver over EGW because: a)I'm cheap, most times; b)I shoot a virtually plain 110 30-06 for freezer food and targets for fun, no long range precision or handloading. I mean, it's not like I could bend the base with my hands anyway. I seriously doubt normal hunting and range trips are gonna do that either.
Posting Permissions
Reply With Quote
Bookmarks