Thanks for the input gentlemen.
The reason i want to have this rifle bedded is for consistency.
As i have stated the rifle will shoot in the low 2s and 3s if you make sure the tang isn't touching the stock and that the action screws are re-tightened evenly, if not the same load that just shot in the low 2s will open up to the 6s or worse.
As to the loads I'm shooting, I haven't tried anything in the rifle that it hates, I've got good results with Varget, Reloader 15, Benchmark, 4895 and even IMR 4064, with bullets ranging from 55 Sierra Blitzking to Sierra 107s.
I couldn't be more pleased with the rifle or the way it shoots but i don't think i will ever get it to shoot consistently until it has a proper bedding job.
Has anyone here ever used TM STOCKWORKS?
I hear he doe's excellent work.
DOCSHU