My best load is IMR4064 @ 36.0 gr with 140 gr Berger. On a good day I can get 1" at 300 yds doing 2675 fps. anything over 2800 fps and primers are Flat.
My best load is IMR4064 @ 36.0 gr with 140 gr Berger. On a good day I can get 1" at 300 yds doing 2675 fps. anything over 2800 fps and primers are Flat.
I was interested to hear what Charlie NC has to say about his having used PP2000mr in his 6.5x47l. I have been using this powder a lot in my .308. I have had really good results with about 45 grains under a 168 hpbt. It burns really well and seems to be more readily available. I am thinking of moving to a 6.5x47 to shoot F class. I have been unable to find any start data for the 6.5x47. I can probably extrapolate off some other powders, but would really like some start values if some one cares to share.
Grendelguy: I've done a bit of loading for two different 260's. I've had pretty good luck with H-4831sc & RL-19. Unlike many others, I have yet to try any H4350, which seems pretty popular.
Sorry I missed your questions earlier. I use 41.5 PP200MR, CCI, with 123 Scenars for 3050fps. Since no data was available I worked up to 43.0gr without any signs of high pressure, and the node was at 41.5 in my 26" barrel. With ideal conditions (no mirage, gentle wind) 3-shot groups were approx 3" at 1000 & 1100 yards; I was pleased but shocked as well! Banged the steel easily at 1200 yards. Next target was at a mile, and I would have tried that but ran out of turret and reticle to even try. Hope I will be able to repeat that performance again, but not holding my breath. Sometimes it all just comes together and that was one of those days.
Working up a hunting load with 140 Berger Hunting VLD. The great thing about the 6.5 x 47 is the OAL is a bit shorter than the 308 so there is no problem running close to the lands if you want, and keep the mag.
Bookmarks