How about a regular ol 260--should be nothing more than a barrel swap?
Thinking about changing my .308 to a 7WSM or 6.5 SAUM. Recommended? Other than a bolt & barrel change, anything else I need to consider?
How about a regular ol 260--should be nothing more than a barrel swap?
[B][COLOR="#FF8C00"]Shooting--it's like high-speed golf[/COLOR][/B]
Magazine change.
If you want a repeater you will need a WSM mag body and follower. You will either need a Push-feed WSM bolt head and firing pin, or a custom bolt head made. You can take a Magnum head from a long action and have the stem shortened to short action length and then reset your pin protrusion and you are good to go. Get ahold of Jim at Apache Gunworks, I believe he has the reamer for the 6.5 SAUM and can make you a small shank barrel to fit your action. PT&G should be able to make you a bolt head if you don't want to convert one.
Hope that helps.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
I already have a .260 or I would. Trying to find a reason to keep the action I have. :)
It does. Thanks! When you're talking about the "body and follower" you're just talking about the bolt, right? Also, will the action itself be strong enough for a magnum round?
I did this for a 300WSM. I did not want a control round feed. Works great!You can take a Magnum head from a long action and have the stem shortened to short action length and then reset your pin protrusion and you are good to go.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Bookmarks