Results 1 to 17 of 17

Thread: 260ai

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Jan 2012
    Location
    Montrose, Co.
    Posts
    200
    3000????? with a 140 grain bullet? I am down with that! I have used IMR 4831 But my groups opened way up. I went up to 45.0 grains with an average of 2941 fps but I was shooting just an inch. Im using resized 243 brass and the primer pockets are loosening up so I havent gone any higher. I did just get my hands on some Lapua brass and have another 100 on order. I think that I saw some 7828 the other day....

    Ryan
    MOAON AABE

  2. #2
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    RyanG, "scope" doesn't worry about loose primer pockets! He just gets out the Super Glue and keeps on packin!......;-))

    Emulate at your own risk! ;-))

Similar Threads

  1. Rip 260ai...
    By LongRange in forum Member Builds & Range Reports
    Replies: 9
    Last Post: 01-24-2016, 09:13 PM
  2. 260AI fit in a S/A mag?
    By mattri in forum 110-Series Rifles
    Replies: 6
    Last Post: 01-21-2016, 06:59 PM
  3. .260AI vs.260
    By EOD350 in forum Ammunition & Reloading
    Replies: 12
    Last Post: 09-16-2013, 12:08 PM
  4. 260AI pet loads?
    By nuclabuyer in forum Ammunition & Reloading
    Replies: 7
    Last Post: 09-09-2010, 11:47 PM
  5. 260AI die set
    By McKinneyMike in forum Ammunition & Reloading
    Replies: 13
    Last Post: 02-14-2010, 01:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •