I have a new savage 26" VLP and have been playing around with some 75 and 80 grain bullets .I set up cardboard at 200 yards and zeroed my savage and my rem 700 20" tactical 223. Then i backed up to 550 yards to shoot some steel plate,i dialed 13 MOA on my remington to get a on target.Next i get the savage out and only had to dial 9 MOA to get it on the steel.According to my ballistic app thats close to 3,000 FPS ,that sounds rather high to me . My load was 25.3 + 25.5 varget,thats where this rifle grouped the best. Any body else know if this the norm or am i pushing them too hard?Bolt lift was normal and my primers were slightly cratered but nothing bad from what i can tell.