Results 1 to 4 of 4

Thread: Help building a .375 Ruger

  1. #1
    birdyblaster
    Guest

    Help building a .375 Ruger


    Hey Guys, first time poster here. I just picked up a donor 111 Long Action in .30-06 with plans on building a .375 Ruger. Any thoughts on where to find an affordable barrel? I would like to keep the cost at a decent level on this build. Also, anybody who's done this build, any tips/tricks or general advice?
    Thanks!

  2. #2
    Basic Member bootsmcguire's Avatar
    Join Date
    Jan 2010
    Location
    Iowa
    Posts
    2,892
    Well first off, a 7RM or a 300WM would have made better donors, but don't worry you can get there from here. First you will need to swap out your 30-06 Bolt head and Magazine for ones from a 7RM or 300WM to work with the 375.

    As to a barrel I would contact Apache Gunworks, Sin-Arms, and/or Northland and see what they can do for you. Jim at Apache Gunworks makes some great barrels at reasonable prices, my last 3 barrels have been made by Jim. Devin at Sin-Arms is a great guy to work with also and does great work. And Jim Briggs at Northland sell some of the best "big name" prefits around, see if he can get you what you want in a CBI barrel. CBI (Criterion) make some great barrels, I have one in 6BR and a couple of my buddies have them in 243AI and all are shooters and clean up well.

    Any one of those three guys should be able to get you a great barrel. You may also wanna check with Dennis at McGowan Barrel Outlet (they have a link here someplace) and see what they can do. I have not bought a barrel from them yet, but they have a good reputation going around here so far.
    204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM

  3. #3
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    5,024
    Good advice............and welcome to the forums!

  4. #4
    Team Savage
    Join Date
    Feb 2007
    Location
    Georgia
    Posts
    1,525
    I have had a couple but just switched to a 9.3x62 but mostly because of the case head size and I am running it on a Mauser.

    You might luck out and find a barrel here or on gunbroker etc. I bought one here a while back but like a dummy sold it. That was a 22" blued barrel.
    Just sold a 24" SS large shank barrel about 1.5 months ago.

    You are probably going to have to have a barrel made unless you want to wait.
    You actually might be better off going on Buds and buying an entire rifle but to me its just not a proper dangerous game rifle unless its control feed, but thats just me.
    I ran mine on an early control feed Savage action.

    BTW great round and the recoil is not bad at all.

Similar Threads

  1. Building a 458
    By 124c41 in forum Introduce Yourself
    Replies: 5
    Last Post: 02-13-2017, 04:19 AM
  2. Building a 300 Win Mag
    By Wayne Powell in forum 110-Series Rifles
    Replies: 12
    Last Post: 02-05-2016, 11:07 AM
  3. Building Another One!
    By Txhillbilly in forum 110-Series Rifles
    Replies: 2
    Last Post: 12-09-2013, 09:08 PM
  4. Building?
    By wch in forum Axis Series Rifles
    Replies: 8
    Last Post: 02-20-2011, 05:56 AM
  5. Building first rifle .204 ruger
    By Scalian in forum 110-Series Rifles
    Replies: 12
    Last Post: 02-07-2010, 07:13 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •