McGowen Precision Barrels - What Cartridges Do You Want To See?

[Cat 64]

6 mm BR, and 6.5x47 Lapua small and large shank 28/30 inches long, 1/8 twist

[Dewey7271]

Second (or third) the 25s
25/06, 250 Savage AI, 257 Weatherby, 10 twist
Also agree on the above in Magnum or heavy sporter contours
6.5/06 would be sweet also in "hunting" contour, 8 twist
May not be enough general interest, but a 270 Weatherby in a 9.5 or 10 twist would be nice

[McGowenRifle]

Cat 64, we're making them currently. Check out www.mcgowenoutlet.com for on hand inventory.

[McGowenRifle]

Guys,

You have spoken! We typically keep some 6mm, 6.5, 7mm, 30 caliber and 338 caliber stainless blanks on hand for quick turn/rush orders. I'm going to initiate a production/inventory order for the floor to make some more. I'll also talk to the McGowen Outlet webmaster and have him add some sporter weight barrels into their order system. What I'll do with these blanks is turn the majority of them to either varmint or bull contours and standard/small shank threading. If you order a barrel in a Savage Sporter or Magnum contour, or frankly any contour that we offer in our Contouring page, we should be able to easily recontour them into the contour that you desire. Keep in mind that the contours on our Contouring page show a larger diameter shank than what is standard on any shank size Savage. The contour is modified to work with your shank size. Once we have those blanks in stock, the Outlet webmaster will make the ordering of them active, so all you'll have to do is choose your shank size, contour, length, crown, finish, rifling twist and chambering. The chamber reamers that we currently carry are listed on our website, you can go to "Barrels" - Chrome Moly Barrels and scroll down the page to the caliber that you are interested in and it will show the rifling twists we offer as well as the chamberings that we offer. We're adding more reamers all the time, so if you don't see it, ask as we may already have it.