The 110 7mm Rem Mag in process, final steps:
1) - Off to the smith to have the muzzle brake installed and indexed in conjuction with headspace, the brake is a Harrels Tactical so it has to be oriented properly.
2) - Bed the recoil lug and front action screw area. Woods all been relieved, shaped for the thicker lug etc, it's ready for the completed barreled action.
3) - Remove the light protective finish I put on the wood stock, complete the stain and apply Tung Oil finish.
4) - Shoot it!!!
I wound up doing a lot more than originally intended, imagine that, a lot of which can't be seen until a target shows it. I'll provide the specs once it's been out to play. This was a pretty beat up rifle when I got it although structurally sound. It's no beauty queen, just a traditional, lets go hunting rifle and I could not be happier :)
Bookmarks