I am about to build a Hog Hunter with a Savage DBM assembly (from a model 10 hunter) into a Tacticool, also. I can see it very likely to not be seated deep enough for the rounds to pick up properly. If that's the case, go ahead and inlet it deeper and don't be afraid to go too deep. If you do go too deep, just get some JB Weld and bed the mag assembly so it's not so deep again. As you said, it has to be just the right height. Not a big deal, though. I wouldn't pay anyone to do it. Take a dremel to it. From my experience, there's nothing on a stock that can't be changed or corrected with a dremel and/or JB Weld. :)
Bookmarks