I've been playing with swaged bullets in this beast, I'm using 45ACP brass fully annealed after turning the rim off and tapering the remaining metal around the primer pocket. One of my cast 340 grain 45-70 bullets nose first into the open case, with a gas check placed over the end. Home machined swaging die with a finished diameter of .5015. Nose punch makes a SWC type nose. The bullets are coming out at 437 grains with the addition of the 45acp case and a 50 cal gas check on the other end. I end up with a full metal jacket with a hollow point nose where the primer pocket was on the case. I haven't had a chance to shoot any of them yet, Probably another week before the weather gets good enough here for that.
http://i482.photobucket.com/albums/r...g?t=1423961818