i have a mod. 10,lrh max 1..it's a 6.5 creedmoor..when chambering a round, as it clears the mag. lips,the following round kicks up the rear of the brass and it enters the chamber rear high and gets stuck..i then have to back the bolt off a hair to allow it to drop down and chamber straight..tried everything with feed lips and no luck..looking in the action while slowly working the bolt it appears the feed lips are simply too short and the mag. follower kicks the brass up before it's close to chambering..[center feed detach. mag.] anyone else run into this?? if so is there a fix or is it CDI for different bottom metal..appreciate the help..Rich