Quote Originally Posted by nocturnalnasty View Post
So when you say "slot" the front of a center feed mag, are you saying I would need to remove the staggered feed mag, then cut the front of a center feed mag box, and then switch to a center feed stock? Or can this be done with my existing staggered feed stock? Also, can I just order a center feed mag box and follower from Savage for this project?

Again, thanks for your input. I really appreciate it.
John
Remover the stagger feed box then slot the front of a center feed mag to allow the tip of the bullets to protrude. You can use your existing stock, it will need some work but so would the center feed. You can order the mag box/follower from Savage. You'll need to lengthen the mag inlet and trim the front baffle to increase bolt throw. I just bed/glue the mag box into the stock to hold it in position.