Anyone rebarrel your Axis to another caliper yet?

[bloodhawke83]

getting my bolt guns done this year!!!

ordered:
1. ordered PTG savage 308 bolt head for my axis (still waiting)
2. ordered 6.5 creedmoor go/nogo gauges, case gauge wheel barel wrench.
3. ordered Criterion Barrel for my axis, with action wrench, new trigger and nut.

what type of wrench you use on the barrel wrench to extend it?? and i know i am missing a barrel vice, anything else?

[drybean]

You do not need a barrel vice, you have a action wrench
if you need to extend the nut wrench use a 1/2in breaker bar
myself I use a 3lb dead blow hammer

If you want to drive to Kennedy Meadows I will change it for you

[bloodhawke83]

You do not need a barrel vice, you have a action wrench
if you need to extend the nut wrench use a 1/2in breaker bar
myself I use a 3lb dead blow hammer

If you want to drive to Kennedy Meadows I will change it for you

ok, thanks for the offer. i planned to do this at my friends shop, depends if i get the bolt on time and he has free time. i want to get it done before ssz7.0. :)

i ordered the bolt on 02/10/2016 and should come in some time this month, i hope. my rem700 bolt is already in transit.