never glass bedded a laminate stock before.

Questions: should I...

-1 Remove material around the tang to free float or should i just bed the tang?
-2 How much (thickness) stock material should i take off where the action contacts the stock?
-3 Bed in front of recoil lug and below or just behind?
-4 Will JB weld work?
-5 How much torque applied to action screws?
-6 Is pillar bedding worth it on laminate since it expands less than solid wood?
-7 best household release agent?

I've done quite a bit of stock and wood work, but am newer to bedding and want to do this one right.

Thanks in advance!