Hornady case prep center issues

[thomae]

I use a Wilson trimmer attached to my small lathe to power it. Works like a champ, although the shaft is not perfectly true, so it wobbles a bit as it turns. The wobble has no effect on the accuracy of the trim, however.

[yobuck]

i have 2 forster trimers. one is for very large cases. i have a power adapter for them but havent used it.
seems to me it only eliminates the turning the handle part. all the other pita steps still remain.

[eddiesindian]

I use a Wilson trimmer attached to my small lathe to power it. Works like a champ, although the shaft is not perfectly true, so it wobbles a bit as it turns. The wobble has no effect on the accuracy of the trim, however.

does that trimmer deburr as it cuts?

[thomae]

does that trimmer deburr as it cuts?

No, I chamfer the inside and outside edges as separate steps.

[eddiesindian]

No, I chamfer the inside and outside edges as separate steps.

I was gonna go that route but oppted for Lee,s cutting tool that screws into a press