Results 1 to 11 of 11

Thread: Rem 783 and Savage barrel

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-29-2013, 11:58 PM #1
    Skunce
    Guest

    Rem 783 and Savage barrel

    Picture of a friend's Remington 783 with my McGowan barrel installed. The Remington didn't have the correct bolt face, it's a .308, and the barrel was a .204 Ruger. I didn't see any reason why it wouldn't work with the correct bolt head. The Remington doesn't have a pinned recoil lug so you would need to hold it in the correct alignment. I used a model 700 type lug jig. The Savage barrel nut wrench fits the Remington nut perfectly.





    Uploaded with ImageShack.us
    Last edited by Skunce; 12-30-2013 at 03:18 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Savage 24: Savage 24P - .22LR Barrel is Bent - Seeking Gunsmith/Barrel Maker services
    By Javel in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 04-05-2016, 09:29 PM
  2. Factory barrel for Criterion barrel swap; NSS Savage Action Wrench use Instuctions
    By chuckc2dog in forum 110-Series Rifles
    Replies: 2
    Last Post: 02-27-2013, 09:49 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules