Hi. A while back I was doing some rechambering work on a few extra Savage Axis bbls. I rechambered them to .221 Fireball. Fun little round and .223 AI. Needing something else to tinker with, I asked for suggestions on here.
I already have several 22-250s and that would require a bolt face change anyway......

I asked about a .22-204, since I have a M12 .204R and lots of brass.
Lo and behold, in the recent issue of Shooting Times, there is an article on the .22-204. Evidently, PTG has been making these reamers for a while...... duh!

So, my question is this:

What would be more 'fun', a .22-204 or a .22-204AI? I realize this isn't going to be anything special, but I do have some extra bbls....... This is just for fun.... It 'appears' the .22-204 is very similar to the .222 Mag......

ron