I can get a good deal on a Remington 700 Scope Mount but I don't know if the screw spacing ins the same.
Does anyone know if it is or a way I could figure it out?
I can get a good deal on a Remington 700 Scope Mount but I don't know if the screw spacing ins the same.
Does anyone know if it is or a way I could figure it out?
Not even close to the same.
NO
mounts for a Savage are not that much though. $20 for Burris or Warne steel 2pc bases, or $39 for an EGW 1pc picatinny rail(0moa or 20moa).
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
I get about a million hits on that info. would you mind posting a link or two?
http://egw-guns.com/store/index.php?...ort=20a&page=5Originally Posted by Boba Debt
Well, you dont say whether it is a short action or a long action, or whether it is a flat rear or round rear reciever, so here are the links to the two main places to get them and you'll have to click on the appropriate one.Originally Posted by Boba Debt
MidwayUSA(just click on "optics", then "Savage"
http://www.midwayusa.com/
SWFA
EGW
http://swfa.com/Savage-C2594.aspx
BURRIS 2pc
http://swfa.com/Burris-Xtreme-Tactic...ases-C650.aspx
WARNE 2pc
http://swfa.com/Savage-C2360.aspx
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
Thanks for the links.
Is a single mount better then a 2 peice mount?
front part of a 2 piece is the same.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Depends on your application. For a long action some scopes can be hard to mount due to having short tubes, so a 1pc will give you alot more mounting options, and also let you get your eye relief right.Originally Posted by Boba Debt
For hunting and using a blind mag I think it is easier with a set of 2pc bases. Just gives you a bit more clearance.
A 1pc base also gives you the choice of having a canted base for long range applications.
”I have a very strict gun control policy: if there’s a gun around, I want to be in control of it.”
~Clint Eastwood
I have a 308 Model 10 FCP-K (308) with a Detachable Box Mag so I guess a 2 peice mount would work for me?
Bookmarks