Results 1 to 8 of 8

Thread: New guy needs help

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    kpb
    Guest

    New guy needs help

    I have been reading this forum for a few months now, and went out and bought me a model 10 FCP 308. It hase a 24'' barrel 1:10 twist. with a Leupold Mark 4 6.5-20x50 LR/T M1 Mil Dot and egw 20 MOA base.What is the best bullet to try for Varmints out 800yds? I will be reloading.Will 150gr BT Hunting Nosler work. i do have some 175 SMK 168 AMAX

    Any help or suggestion would really help

    Thanks

  2. #2
    Basic Member Dennis's Avatar
    Join Date
    Dec 2008
    Age
    68
    Posts
    1,870

    Re: New guy needs help

    800yds . . . you will need at least 175's, I can only speak for 600 yds, SMK's 175 do pretty good in my 308
    [B][SIZE=3]Dennis[/SIZE][/B]

  3. #3
    Tightgroups
    Guest

    Re: New guy needs help

    KPT, I have several 308, but cant shoot past 440 yds, thats our ranges max. So i only shoot 168g SMKs at 100 and 200 paper targets, shooting for group size. However my best shooting powder has been Varget. And when loaded with 44.5g of Varget and that 168 SMK, with a 24" barrel, I get 2710 fps, and better than 1/4 MOA accuracy.
    I know some guys shoot 150g at the longer ranges, but dont know there load.
    Good Luck in your long range shooting venture, and by the way, how do you like that scope, I have the same scope on my 308.
    Mike.

  4. #4
    Basic Member
    Join Date
    Dec 2006
    Posts
    125

    Re: New guy needs help

    I shot 168 amaxs with 44.4grs of varget with cci br-2,out of a 26" tube and get 2700fps and 4-5" groups at 800yrds with -209" of drop but a 10mph , 90 degree wind will blow you off 61".

    when you shoot a 308 at those long ranges its all about the wind and exact distances

    820 yards is -224" and 65" so its a miss if you thought it was 800

    get a good rangfinder and a kestrel wind meter and the amaxs can do it
    112,223,choate uv,nikon 6-18<br />lrpv,204,hs stock,sightron S3 6-24x50<br />12 target,McGowen 6mmbr,SSS hbr,Sightron S3 8-32<br />Mark II,22lr,thumbhole,Tasco 6-24x40<br />11 youth,243,Simmons 2.5-10x50<br />116fcss 30-06<br />12fv,204,VX-3 4.5-14x50

  5. #5
    Basic Member Dennis's Avatar
    Join Date
    Dec 2008
    Age
    68
    Posts
    1,870

    Re: New guy needs help

    The below info came from an F class shooter:

    * 600 through 1000 yard loads for 308 bolt guns:


    Winchester cases, full-length sized.

    IMR4064 powder, charge weight as follows for different case weights;

    Sierra or Cartiruccio 190-gr. bullet

    + 42.5 grains in case weighing about 150 grains (WCC58).
    + 42.0 grains in case weighing about 157 grains (WCC60 or early Winchester cases).
    + 41.5 grains in case weighing about 165 grains (current Federal)

    Note - Sierra&#39;s 200-gr. or Berger&#39;s 210-gr. bullet can also be used if the powder charge is reduced about 1 grain.
    [B][SIZE=3]Dennis[/SIZE][/B]

  6. #6
    kpb
    Guest

    Re: New guy needs help

    Thanks for the info everyone, will i be able to shoot the 150gr nosler and get decent groups say out to 500yds. I have not even shoot it yet wait for my reloading stuff to come in.

    Thanks alot

  7. #7
    Basic Member Dennis's Avatar
    Join Date
    Dec 2008
    Age
    68
    Posts
    1,870

    Re: New guy needs help

    Try some 180 NBT&#39;s with the above recommendations! You need the heavier bullet for 600 +shots.

    Varget is maybe a little hot for this bullet, Varget is OK for the 150&#39;s.
    [B][SIZE=3]Dennis[/SIZE][/B]

  8. #8
    kpb
    Guest

    Re: New guy needs help

    Thanks Dennis

    I think i will try the 180 NBT&#39;s i do have Varget, IMR 4064

    Thanks

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •