Reply With Quote1/2 28 tpi
What is the thread size on a BAS and bolt body? Thanks in advance.
1/2 28 tpi
Last edited by stangfish; 11-17-2013 at 05:38 PM.
For some reason I was thinking it was 1/2"-28TPI.
I don't have my pitch gauge here as I leave it work most of the time, but glancing at a BAS here it seems to be a finer pitch than a small shank barrel I have here and I know that the small shank barrels are 1.055"-20TPI. I got up way to early this morning so perhaps its just my tired eyes.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Boots is correct.
The one who dies with the most toys still dies--except in Christ.
You are correct Boots. I don't know what I was thinking. Just stripped it down and verified.
Thanks for the verification, been a long day.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Thanks for the help. Had a little trouble getting the bolt started again. I will pick up a tap and die to clean up the threads. Papalote.
You need to de-cock and start the threads. Then use the edge of a workbench to cock it.
Here is something you might be interested in
http://www.amazon.com/28-Tap-Die-Set...s=1%2F2-28+tap
A tap won't do much good in the bolt body...they are just as hard as the tap.
"As long as there's lead in the air....there's still hope.."
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks