I can only tell you my experiences.
I have two piece Weaver aluminum mounts on my Hog Hunters, They are #48466. Nice mounts and cheap, have Weaver 1-3 variable Classic scopes on both, they are set up the same !
On my Mod 10 FP-SR I have Ironsighter one piece mounts, low rings and they are fine with my 4x16 44mm 30mil tube scope. What is nice about the iron sighter is 1/2 of the mount is cut out over the bolt area so it is easy to access your rounds ....they make a right and a left hand version, I got them at Midway and don't remember the #
Hope this helps some.
wll
Bookmarks