Reply With QuoteIs this that dumb a question that no one is willing to answer? Some one on here has to know the answer to this. If I had access to a large selection at the local gunshop I would check myself, but no such luck!
Will the bottom metal for a DBM and the Hinged floor plate versions of a 116 be the same? I have a stock Joel Russo made for me for a 116 with a hinged floor plate, but I would rather have a DBM. Can I switch over or will I have problems?
Is this that dumb a question that no one is willing to answer? Some one on here has to know the answer to this. If I had access to a large selection at the local gunshop I would check myself, but no such luck!
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Excellent, thanks very much!!! That makes me quite happy!! One more question, I am hoping to do one LA for a 6.5X284, and be able to switch to a 7MM mag. As long as I have both size mag wells, and bolt heads this should all work, correct?
Posting Permissions
Bookmarks