The difference is in the machining of the of the primary extraction ramp in the back of the receiver, and the bolt handle. The Axis doesn't use a rear baffle like a 110 Savage does, that allows the 110 to change out baffles and switch sides. You could not use the same stock for an axis and a 110 because there are many differences. Some of the differences are: 1. the Axis has a different screw spacing, than any 110 or 10 action made. 2. The Axis has no rear tang unlike a 110/10 action, so therefore the trigger set up and inletting are completely different. 3. The Axis uses a half lug recoil lug that is not supported by the action but located in the stock. There are a few more differences between the two, but some of these are the main culprits.
Bookmarks